|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
IP120A IP120 IP7900A IP7900 LM120 SERIES SERIES SERIES SERIES SERIES 1 1 2 2 1.5 AMP NEGATIVE VOLTAGE REGULATOR 3 3 FEATURES Pin 1 - Ground Pin 2 - VOUT Case - VIN Pin 1 - Ground Pin 2 - VOUT Case - VIN * OUTPUT VOLTAGES OF -12, -15V * 0.01% / V LINE REGULATION * 0.3% / A LOAD REGULATION * THERMAL OVERLOAD PROTECTION * SHORT CIRCUIT PROTECTION K Package - TO-3 R Package - TO-66 ! * OUTPUT TRANSISTOR SOA PROTECTION 123 * 1% VOLTAGE TOLERANCE (-A VERSIONS) Pin 1 - Ground Pin 2 - VIN Pin 3 - VOUT Pin 1 - Ground Pin 2 - VIN Pin 3 - VOUT Case - VIN* DESCRIPTION The IP120A / LM120 / IP7900A / IP7900 series of 3 terminal regulators is available with several fixed output voltage making them useful in a wide range of applications. The A suffix devices provide 0.01% / V line regulation, 0.3% / A load regulation and 1% output voltage tolerance at room temperature. Protection features include Safe Operating Area current limiting and thermal shutdown. G Package - TO-257 IG Package- TO-257* * isolated Case on IG package SMD PACKAGE - SMD1 Ceramic Surface Mount GND NC NC VOUT 1 2 3 4 8 7 6 5 NC NC VIN NC J Package - 8 Pin Cerdip ABSOLUTE MAXIMUM RATINGS (Tcase = 25C unless otherwise stated) VI PD Tj Tstg Semelab plc. DC Input Voltage Power Dissipation Operating Junction Temperature Range Storage Temperature Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk (for VO = -12, -15V) 35V Internally limited -55 to 150C -65 to 150C Prelim. 6/01 IP120A IP120 IP7900A IP7900 LM120 Parameter VO Output Voltage Test Conditions IO = 500mA IO = 5mA to IMAX VO Low Supply IO = 5mA to IMAX VIN = -14.5V to -27V VIN = -14.5V to -30V IO = 0.5 IMAX VO Line Regulation IO IMAX VIN = -16V to -22V VIN = -19V VO Load Regulation VIN = -19V IO 0.5 IMAX VIN = -19V IO = 5mA to IMAX IQ Quiescent Current Change VIN = -19V IO 0.5 IMAX f = 10Hz to 100kHz VIN = -19V f = 120Hz Ripple Rejection Dropout Voltage RO Isc Ipk Output Resistance Short Circuit Current Peak Output Current Average Temperature Coefficient of VO Input Voltage required to maintain line regulation VIN = -15V to -25V IO = IMAX f = 1 kHz VIN = -35V VIN = -19V IO = 5mA IO IMAX -14.5 IO IMAX IO 0.5 IMAX TJ = -55 to 150C 58 58 TJ = -55 to 150C VIN = -14.5V to -30V VIN = -15V to -30V TJ = -55 to 150C VN Output Noise Voltage VIN VO TJ = -55 to 150C TJ = -55 to 150C IO = 5mA to1.5A IO = 250mA to 750mA IO = 5mA to IMAX TJ = -55 to 150C IQ Quiescent Current VIN = -14.8V to -27V TJ = -55 to 150C VIN = -19V TJ = -55 to 150C PD PMAX VIN = -14.8V to -27V PD PMAX IP7912A IP120A-12 Min. Typ. Max. -11.88 -11.64 -11.40 4 4 1 2 12 4 8 0.2 1 0.2 0.2 0.1 0.1 75 72 72 1.1 8 0.6 2.4 0.5 1.2 3.3 4.8 -14.5 2.3 -12 -12.12 -12.36 -12.36 18 18 4 9 32 19 60 0.4 2 0.4 0.5 0.4 0.5 960 56 56 SERIES SERIES SERIES SERIES SERIES Units V IP7912, IP120-12 LM120-12 Min. Typ. Max. -11.76 11.52 -11.40 4 4 1 2 12 4 8 0.2 1 0.2 0.2 0.1 0.1 75 72 72 1.1 8 0.6 2.4 0.5 1.2 3.3 4.8 2.3 -12 -12.24 -12.48 -12.60 120 200 25 60 80 60 120 0.4 2 0.4 0.5 0.4 1.0 960 V mV mV mA mA V dB V m A mV C V 1) All characteristics are measured with a capacitor across the input of 0.22F and a capacitor across the output of 0.1F. All characteristics except noise voltage and ripple rejection ratio are measured using pulse techniques (tp 10ms, 5%). Output voltage changes due to changes in internal temperature must be taken into account separately. 2) Test Conditions unless otherwise stated: PMAX = 10W for TO-220SM , P MAX = 1W for Cerdip, P MAX = 20W for all other package devices IMAX = 1.0A , TJ = 25C Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Prelim. 6/01 IP120A IP120 IP7900A IP7900 LM120 Parameter VO Output Voltage Test Conditions IO = 500mA IO = 5mA to IMAX VO Low Supply IO = 5mA to IMAX VIN = -17.5V to -30V VIN = -17.5V to -30V IO = 0.5 IMAX VO Line Regulation IO IMAX VIN = -20V to -26V VIN = -23V VO Load Regulation VIN = -23V IO 0.5 IMAX VIN = -23V IO = 5mA to IMAX IQ Quiescent Current Change VIN = -23V IO 0.5 IMAX f = 10Hz to 100kHz VIN = -23V f = 120Hz Ripple Rejection Dropout Voltage RO Isc Ipk Short Circuit Current Peak Output Current Average Temperature Coefficient of VO Input Voltage required to maintain line regulation VIN = -18.5V to -28.5V IO = IMAX Output Resistance f = 1 kHz VIN = -35V VIN = -23V IO = 5mA IO IMAX -17.5 IO IMAX IO 0.5 IMAX TJ = -55 to 150C 56 56 TJ = -55 to 150C VIN = -17.5V to -30V VIN = -18.5V to -30V TJ = -55 to 150C VN Output Noise Voltage VIN VO TJ = -55 to 150C TJ = -55 to 150C IO = 5mA to 1.5A IO = 250mA to 750mA IO = 5mA to IMAX TJ = -55 to 150C IQ Quiescent Current VIN = -17.9V to -30V TJ = -55 to 150C VIN = -23V TJ = -55 to 150C PD PMAX VIN = -17.9V to -30V PD PMAX IP7915A IP120A-15 Min. Typ. Max. -14.85 -14.55 -14.25 4 4 2 5 12 4 9 1 1 0.2 0.2 0.1 0.1 90 70 70 1.1 9 0.6 2.4 0.6 1.2 3.3 6 -17.5 2.3 -15 -15.15 -15.45 -15.45 22 22 10 30 35 21 75 1.9 2 0.4 0.5 0.4 0.5 1200 54 54 SERIES SERIES SERIES SERIES SERIES Units V IP7915, IP120-15 LM120-15 Min. Typ. Max. -14.7 -14.4 -14.25 4 4 2 5 12 4 9 1 1 0.2 0.2 0.1 0.1 90 70 70 1.1 9 0.6 2.4 0.6 1.2 3.3 6 2.3 -15 -15.3 -15.6 -15.75 150 250 75 150 80 75 150 1.9 2 0.4 0.5 0.4 1.0 1200 V mV mV mA mA V dB V m A mV C V 1) All characteristics are measured with a capacitor across the input of 0.22F and a capacitor across the output of 0.1F. All characteristics except noise voltage and ripple rejection ratio are measured using pulse techniques (tp 10ms, 5%). Output voltage changes due to changes in internal temperature must be taken into account separately. 2) Test Conditions unless otherwise stated: PMAX = 10W for TO-220SM , P MAX = 1W for Cerdip, P MAX = 20W for all other package devices IMAX = 1.0A , TJ = 25C Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Prelim. 6/01 IP120A IP120 IP7900A IP7900 LM120 APPLICATIONS INFORMATION SERIES SERIES SERIES SERIES SERIES I N PU T VIN GND C1 * 2. 2F T AN T . VOU T OUTPUT I N PU T VIN GND VOU T OUTPUT R1 C2 1 F TANT. I N PU T VIN GND C1 2. 2F T AN T . VOU T C2 1F T AN T . R1 C2 * * 1 F TANT. C1 2. 2F T AN T . O U TPU T IOUT R2 Fixed Output Regulator * Required if the regulator is located far from the power supply. ** Required for stability. 25mF electrolytic may be substituted. Adjustable Output Regulator VOUT VREG (R1+R2) R1 Current Regulator VREG R1 IOUT = + IQ Order Information Part Number IP7900A IP7900 IP120A IP120 LM120 K-Pack (TO-3) 4 4 4 4 4 R-Pack (TO-66) 4 4 4 4 4 G/IG-Pack (TO-257) 4 4 4 4 4 SG-Pack J-Pack Temp. SMD1 8 Pin Cerdip Range 4 4 -55 to +150C 4 4 " 4 4 " 4 4 " 4 4 " Note: To order, add the package identifier to the part number. eg. IP7912AK IP120SMD-15 Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Prelim. 6/01 |
Price & Availability of LM120AG-12 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |